FAQ

Questions and answers

What is Vansy AI?

Vansy AI is design software for camper van conversions built in 80/20, the T-slot aluminum extrusion many builders use for furniture frames. You describe the van interior you want in plain words, and it designs the frame: every member, connector and panel, checked for fit in a 3D model, with a cut list and the weight derived from the parts.

It is still being built. Early access opens to the waiting list first, in small groups.

How do I design an 80/20 van build without learning CAD?

Today the usual options are to buy plans drawn for someone else’s layout, or to learn CAD and the 80/20 parts catalog yourself. Vansy AI is a third way: you say what you want, it asks only the choices that change the build, and it produces the frame design, parts and cuts for you.

What it produces is a design model, not an engineering sign-off. Check fit in your own van and decide for yourself how the furniture is fastened and loaded.

What software can design 80/20 or aluminum-extrusion van cabinets and frames?

General CAD tools can model extrusion if you draw every profile and connector yourself. Van layout planners place furniture in a van, but none of the ones reviewed in November 2026 models aluminum extrusion as a construction system. Vansy AI designs the frame itself in extrusion: profiles, connectors, panels and cuts, checked as solids in the model.

As of November 2026 it covers 5 kinds of furniture (galley, fixed bed, overhead cabinet, electrical carrier and shower, plus drawers and hinged doors) in one van.

Is there an AI tool for designing a van conversion?

Vansy AI is one: an AI agent that designs van furniture frames in 80/20 aluminum extrusion from a plain-language request, checks every design for collisions, clearances and drawer and door travel in a CAD model, and repairs the design when a check fails.

It designs the furniture and how it fits the van. It does not design insulation, wiring or plumbing.

How do I get a cut list for an 80/20 van build?

By hand, you work out each piece’s length from the overall dimensions and subtract what each joint and connector takes up, then recount when anything changes. In Vansy AI the cut list comes from the same design as the 3D model, so when you change a width the affected cuts update with it.

Should I build my van in 80/20 or wood? Is 80/20 really lighter?

Builders choose 80/20 because it doesn’t rot, warp or squeak, it bolts to the van, it comes apart when you change your mind, and it takes a saw and a hex key rather than a woodshop. It costs more than plywood.

Whether it is lighter depends on the design. Published comparisons range from much lighter to about the same, because the profile chosen and the panels decide it. Vansy AI does not claim 80/20 is lighter than wood; it shows you what your design weighs, derived from its parts, so you can compare.

Which 80/20 profile should I use for a van bed or a galley?

It depends on the span, the load and how the piece is supported: heavier sections where the load is, lighter ones where it isn’t, with the connector each joint needs. Choosing them, and working out how long every piece is once the joints are accounted for, is the hard part Vansy AI is built to do.

Vansy AI gives a design model, not a structural rating. Decide for yourself how a bed or galley is fastened and loaded.

Should I buy van build plans or design my own?

Plans are on sale now for a few layouts and need only that you follow instructions, but the layout is someone else’s, and when you change your mind the plans and the parts list are wrong. Designing your own in CAD gives you your layout after weeks of learning, and you check the fit yourself.

Vansy AI designs the layout you describe and keeps every member and cut consistent when you change it. It is early: few kinds of furniture and one van, with more every week.

How is Vansy AI different from buying plans or using a layout planner?

Plans are a fixed design for someone else’s layout. Layout planners lead with large catalogs of ready-made components and many vehicles. Vansy AI designs the furniture frame itself in aluminum extrusion, member by member, and checks it in a CAD model on every change.

It has far fewer kinds of furniture and fewer vehicles than a layout planner today, and says so.

Does Vansy AI design the whole van? What about electrical, plumbing and insulation?

No. Vansy AI designs the furniture and how it fits the van. It does not design insulation, wiring or plumbing, and it does not give an engineering sign-off. It can frame an electrical carrier, the furniture that holds the electrical components, but not the electrical system itself.

Does Vansy AI work with a Ford Transit?

Yes. As of November 2026 it supports one vehicle: the Ford Transit 148 extended high roof. Other vans are planned; join the waiting list and say which van you have, because the answers decide what gets built next.

Can I try Vansy AI? When is early access?

Not yet. Vansy AI is still being built, and there is no date. Early access opens to the waiting list first, in small groups, starting with people who are in the middle of a build. Until then the waiting list gets the product updates by email.

Something missing? Join the waiting list and reply to any update with your question. See also the product updates.